Online Shop

8 Channel 10A Multifunction Actuator

Product Code:
AMMA-08-10.1

Description

The devices can set switch outputs curtain outputs, DC curtain output, fan control output and valve control output. The output requirements are configured via parameter.

Switch output: connect some electrical loads, such as lighting, sockets. All channels have the function of general switch, staircase lighting, light flashing and switch delay, scene, operation hours counter, logic and force operation;

Curtain output (AC/DC): connect with motor blinds, awnings, roller blinds, vertical blind, etc. With operating shutter and slat adjustment, automatic sun protection, scene and safety operating etc.;

Fan control: support up to three level fan speed, with general operation, forced operation, auto. operation and status response etc.;

Valve control: connect with 2pipes or 4pipes system, support three valve control types: 3point, open and close, continuous, PWM and 2state-ON/OFF, and support disable/enable HEAT and COOL, valve status response, valve purge etc.

Heating control: support continuous, PWM and 2 state-ON/OFF,monitor and force function available

Additional Information
  • Dimension 72 mm×90mm×64mm
  • Installation DIN rail
  • Bus voltage 21-30V DC, via KNX bus
  • Bus current <12mA
  • Bus consumption <360mW
  • Capacitor charge current <20mA
  • Un rated voltage 230V AC (50/60Hz), 30V DC
  • In rated current capacity 10A/70uF (max.100W, if LED load)
  • switching current 16A/240V AC

Collection & Use of Personal Information

Request a Call Back

    Make an Enquiry

      Request a Free Consultation